For Pixi, MegaDef and Revolution systems with a valid SMA contract.

To install, download the file to /pogle/versions, then click on the icon in the Vault and follow the prompts to complete installation. Refer to Chapter 2 of the Installation Manual for full details of the procedure.

25th April 2013

Please read the latest release notes before installing.

• Fix to channel selection buttons for Pixi Mega1 layer.
• Some stability improvements.

For Pixi, MegaDef and Revolution systems with a valid SMA contract.

To install, download the file to /pogle/versions, then click on the icon in the Vault and follow the prompts to complete installation. Refer to Chapter 2 of the Installation Manual for full details of the procedure.

4th March 2011

Please read the latest release notes before installing.

• Bug fix for Revolution colour timing syncs.
  
• Implement Decklink for thumbnail grabbing if no Stillstore license (will not grab full-size stills).
  
• New user option to either use full tablet height or maintain screen aspect ratio on tablet. This is useful when splitting the tablet in left and right sections (see v754 release notes).
  
• Revo Hue, Sat, Lum isolation: Left/right (or high/low) soft edges can be adjusted independently by holding ALT (above "Layer 1" on SCC panel, or "Trim" on Transport panel) and using Width and Softness isolation knobs. This works on creative channels and six vector colour cubes.
• If using license dongle, splash screen now indicates if Pogle Workstation is present and allows this to be disabled if required. If not using a license dongle, the workstation must always be present.
  
• Bug fix when grabbing images from Enter or Add in Video mode (was causing a crash).
• Bug fix in Data mode when Adding/Entering events (was causing the occasional crash).
• Bug fix for Decklink button in Vault when using license dongle.
• "Stripe All VTRs" bug fix.
• FastTrack points are shifted with Event. To fix FastTrack points (ie. shift event while leaving FT points on same frame) hold ALT key when shifting event.
• Bug fix to stop clipping in some circumstances when using soft isolation in six-vector channels.

For Pixi, MegaDef and Revolution systems with a valid SMA contract.

To install, download the file to /pogle/versions, then click on the icon in the Vault and follow the prompts to complete installation. Refer to Chapter 2 of the Installation Manual for full details of the procedure.

29th July 2010

Please read the latest release notes before installing.

• Bug fix to stop overflowing system log and debug with errors in some situations.
  
• Bug fix to stop crash when resetting Pixi with "YoYo" selected as DDR source.
• New Annotations feature to add written notes to projects. These can be used to mark whether, for example, the project and lists were created with the legaliser turned on, or a noise reducer in circuit.
• Revo Datamode:
• Original Events in the EDL (obtained with the "Grab EDL" button or by pressing Enter without a list open) are now displayed in the List text view in white. Extra events, added by the user or Revo Autoshot, are displayed in Yellow.
• EDL Events (white) cannot be shifted or deleted. If these are incorrect it indicates that the original EDL is incorrect and the EDL should be fixed on the YoYo or client side and reimported. Added events (in yellow) can be shifted or deleted.
  
• Events added with the Autoshot are now treated in the same way as user added events and so can be deleted, shifted or new events added.
• In COPY or READ mode, if you break away a single layer (eg. C1), an individual channel can be selected with the channel buttons. This only selects a single channel. If you wish to select more than one channel, use the Status panels.
• Bug fix in READ mode when selecting C1 using the "C1" key on the Transport panel (previously was not turning on and off the C1 layer using the button).
  

For Pixi, MegaDef and Revolution systems with a valid SMA contract.

To install, download the file to /pogle/versions, then click on the icon in the Vault and follow the prompts to complete installation. Refer to Chapter 2 of the Installation Manual for full details of the procedure.

3rd June 2010

Please read the latest release notes before installing.

• Bug fix for "List Full" error message when using composite image grabbing. Please enable "Compressed List Images" in User Setup.
  

If you are upgrading from v1.13 or below: To use this version you must use NID firmware v38.4 or greater and processor firmware v1.21 or v2.21or greater. Please see the v1.14 Update file.

If you are upgrading from v1.13 or below: To use this version you must use NID firmware v38.4 or greater and processor

5th April 2013

If you are upgrading from v1.13 or below: To use this version you must use NID firmware v38.4 or greater and processor firmware v1.21 or v2.21or greater. Please see the v1.14 Update file.

6th June 2012

Pluto Plugin for CineSpace CineProfiler v1.1.

To install, download and place in CineSpace plugin directory.

Pluto Plugin for CineSpace CineProfiler v1.1.

To install, download, unzip and place in CineSpace plugin directory.

Pluto Plugin for CineSpace CineProfiler v1.1.

To install, download, unzip and place in CineSpace plugin directory.

Latest release.

Refer to Chapter 5 of the Installation Manual for detailed instructions on how to install this firmware.

To install, download into /pogle/versions, click on the icon in the Vault, then follow the prompts.

Do not use if you have a single board revolution. This version should also only be used with Pogle Platinum software version 742 or later.

As always we do not recommend applying these updates midway through a project as there may be minor variations in colour settings between versions.

19th December 2010

Latest release.

To install, download into /pogle/versions, click on the icon in the Vault, then follow the prompts.

Do not use if you have a dual-board Revolution.

As always we do not recommend applying these updates midway through a project as there may be minor variations in colour settings between versions.

18th December 2010

Latest release.

Refer to Chapter 5 of the Installation Manual for detailed instructions on how to install this firmware.

To install, download into /pogle/versions, click on the icon in the Vault, then follow the prompts.

This firmware is for use with Revo Express only. Load this firmware when Platinum is running in Data mode.

As always we do not recommend applying these updates midway through a project as there may be minor variations in colour settings between versions.

18th October 2010

Firmware for PCIe card on Mac.

Must be used with Revolution Express firmware rvPCI_2.10A_20101018.rfw and Platinum v751.

YoCursor: latest version.

Latest version.

To install download the file to /pogle/versions, then click on the icon in the Vault and follow the prompts to complete installation.

3rd February 2010

Please read the latest release notes before installing.

Changes to Revolution CDL 1.25

• Improved Filmcache operation between software restarts, plus support for EDL conforming.
• R2 shape controls are on gain trackerball when on the right layer and ALT is pressed. In this mode (with ALT held down) double clicking the trackerball reset button will set the shape to a default shape.
• ImageMill Steady fix.
• Improved status panels.
• Revo Autoshot support (chargable option - please contact Pandora for details).
  

Debug version.

This version has added debug. Debug logs are written to the /var/log/pandora directory.

To install download the file to /pogle/versions, then click on the icon in the Vault and follow the prompts to complete installation.

24th November 2008

Pixi/MegaDef Firmware April 2006.

Pixi/MegaDef Firmware November 2004.

For Revolution CDL Hardware configuration only; do not install on a 'base' system.

To install, download into /pogle/versions and click on the icon in the Vault window - the Revolution will automatically reload the firmware if it's on.

June 27th 2008